FD60 Fire Doorsets for Ormskirk buildings
Getting FD60 fire doors right in Ormskirk means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Ormskirk surveys with other visits in Lancashire, such as Maghull and Skelmersdale, which helps keep survey dates flexible.
What the law says in Ormskirk
Fire doors in Ormskirk sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Lancashire
Guide prices for FD60 fire doors in Ormskirk run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Ormskirk
Typical uses for FD60 fire doors in Ormskirk include stair cores in taller blocks and plant and boiler rooms.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you work for landlords and managing agents in Ormskirk?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Which rules do FD60 fire doors in Ormskirk need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Ormskirk?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Ormskirk
- Maghull (4 miles)
- Skelmersdale (4 miles)
- Kirkby (6 miles)
- Southport (7 miles)
- Formby (7 miles)
- Litherland (8 miles)
More doorsets for Ormskirk
- Fire-Rated Screens & Fanlights in Ormskirk
- Glazed Fire Doors in Ormskirk
- Timber Fire Doorsets in Ormskirk
- Steel Fire Doors in Ormskirk
- Fire Door Ironmongery & Closers in Ormskirk
- FD30 Fire Doorsets in Ormskirk
- Security Fire Doors in Ormskirk
- Composite Fire Doors in Ormskirk
- FD60 Fire Doorsets across Lancashire
- All fire doors in Ormskirk