Getting FD60 fire doors fitted in Coalville
If your fire risk assessment in Coalville has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in LE67 are free and quotes are fixed and itemised.
Where possible we combine Coalville surveys with other visits in Leicestershire, such as Loughborough and Swadlincote, which helps keep survey dates flexible.
Fire door rules in Coalville
Because Coalville is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Coalville
Our guide price for FD60 fire doors in Coalville is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are needed
In Coalville, FD60 fire doors are typically needed in compartment walls and plant and boiler rooms.
Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Leicestershire
Do you work for landlords and managing agents in Coalville?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Is the survey in Coalville free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Coalville?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Loughborough (7 miles)
- Swadlincote (9 miles)
- Leicester (12 miles)
- Hinckley (12 miles)
- Burton upon Trent (13 miles)
- Long Eaton (13 miles)
More doorsets for Coalville
- FD30 Fire Doorsets in Coalville
- Stairwell & Escape Route Doors in Coalville
- Riser & Service Cupboard Doors in Coalville
- Timber Fire Doorsets in Coalville
- Flat Entrance Fire Doors in Coalville
- FD90 & FD120 Doorsets in Coalville
- Communal & Corridor Fire Doors in Coalville
- Double & Leaf-and-a-Half Fire Doors in Coalville
- FD60 Fire Doorsets across Leicestershire
- All fire doors in Coalville