Certified FD60 fire doors for Denton
Need FD60 fire doors in Denton? We supply and fit complete certified doorsets across Greater Manchester, starting with a free measure survey in and around M34. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover M34 and the surrounding area, including Hyde. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Denton?
New and replacement fire doors in Denton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Denton?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Denton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Denton
Wherever they are in Denton, FD60 fire doors are most often specified for plant and boiler rooms and higher-risk stores.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Denton
Do you cover Denton?
Yes. We survey, supply and fit FD60 fire doors throughout Denton and the rest of Greater Manchester, including M34 and nearby Hyde.
What does a Denton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Denton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Denton
- Hyde (2 miles)
- Dukinfield (2 miles)
- Droylsden (2 miles)
- Ashton-under-Lyne (2 miles)
- Stalybridge (3 miles)
- Stockport (4 miles)
Other products in Denton
- Communal & Corridor Fire Doors in Denton
- Security Fire Doors in Denton
- Fire Doors for Homes in Denton
- Fire-Rated Screens & Fanlights in Denton
- Stairwell & Escape Route Doors in Denton
- Timber Fire Doorsets in Denton
- Fire Door Supply & Fit in Denton
- HMO Fire Doors in Denton
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Denton