Our Ashton-under-Lyne supply and fit service
We fit FD60 doorsets for compartment walls, cores and plant rooms in Ashton-under-Lyne and the rest of Greater Manchester. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Greater Manchester coverage includes Ashton-under-Lyne and its neighbours Dukinfield, Stalybridge and Droylsden; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Ashton-under-Lyne?
In Ashton-under-Lyne, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in Greater Manchester
Our guide price for FD60 fire doors in Ashton-under-Lyne is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are needed
In Ashton-under-Lyne, FD60 fire doors are typically needed in stair cores in taller blocks and plant and boiler rooms.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
- Compartment walls
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Ashton-under-Lyne: questions
Can you work around tenants or staff in Ashton-under-Lyne?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Ashton-under-Lyne?
Yes. We survey, supply and fit FD60 fire doors throughout Ashton-under-Lyne and the rest of Greater Manchester, including OL7 and nearby Dukinfield.
Do you work for landlords and managing agents in Ashton-under-Lyne?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Dukinfield (1 mile)
- Stalybridge (2 miles)
- Droylsden (2 miles)
- Denton (2 miles)
- Hyde (2 miles)
- Failsworth (3 miles)
Other fire doors in Ashton-under-Lyne
- Fire-Rated Screens & Fanlights in Ashton-under-Lyne
- Flat Entrance Fire Doors in Ashton-under-Lyne
- HMO Fire Doors in Ashton-under-Lyne
- Composite Fire Doors in Ashton-under-Lyne
- Fire Doors for Homes in Ashton-under-Lyne
- FD90 & FD120 Doorsets in Ashton-under-Lyne
- Timber Fire Doorsets in Ashton-under-Lyne
- Acoustic Fire Doors in Ashton-under-Lyne
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Ashton-under-Lyne