Certified FD60 fire doors for Colchester
Looking for FD60 fire doors in Colchester? Our supply and fit service covers CO1 and the surrounding area, including Sudbury and Clacton-on-Sea. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Whether your building is in central Colchester or on its edges towards Sudbury, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Which rules apply in Colchester?
In Colchester, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Colchester
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Colchester, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Colchester
Stair cores in taller blocks and compartment walls are among the most common settings for FD60 fire doors, in Colchester as elsewhere.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
- Plant and boiler rooms
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Colchester
Do you cover Colchester?
Yes. We survey, supply and fit FD60 fire doors throughout Colchester and the rest of Essex, including CO1 and nearby Sudbury.
What does a Colchester quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Colchester.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Neighbouring areas
- Sudbury (12 miles)
- Clacton-on-Sea (13 miles)
- Witham (13 miles)
- Maldon (15 miles)
- Braintree (15 miles)
- Ipswich (16 miles)
Other fire doors in Colchester
- FD90 & FD120 Doorsets in Colchester
- Stairwell & Escape Route Doors in Colchester
- Fire-Rated Screens & Fanlights in Colchester
- Fire Door Supply & Fit in Colchester
- Communal & Corridor Fire Doors in Colchester
- Timber Fire Doorsets in Colchester
- FD30S Smoke Control Doorsets in Colchester
- Steel Fire Doors in Colchester
- FD60 Fire Doorsets across Essex
- All fire doors in Colchester