Certified FD60 fire doors for Ipswich
We cover Ipswich and nearby Harwich for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Surveys in Ipswich are booked around your access needs, and we cover the wider Suffolk area too.
Fire door rules in Ipswich
Because Ipswich is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Ipswich?
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Ipswich, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Ipswich
Typical uses for FD60 fire doors in Ipswich include compartment walls and plant and boiler rooms.
Suffolk's demand comes from Ipswich's waterfront flats and offices, Felixstowe's port logistics and market towns across the county.
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Ipswich
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ipswich.
Will I get certificates for the doors fitted in Ipswich?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Ipswich?
Yes. We survey, supply and fit FD60 fire doors throughout Ipswich and the rest of Suffolk, including IP1 and nearby Harwich.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Ipswich
- Harwich (10 miles)
- Felixstowe (11 miles)
- Stowmarket (11 miles)
- Colchester (16 miles)
- Sudbury (18 miles)
- Clacton-on-Sea (19 miles)
Other fire doors in Ipswich
- FD90 & FD120 Doorsets in Ipswich
- Flat Entrance Fire Doors in Ipswich
- Fire Exit Doors in Ipswich
- School & Healthcare Fire Doors in Ipswich
- Communal & Corridor Fire Doors in Ipswich
- Security Fire Doors in Ipswich
- Stairwell & Escape Route Doors in Ipswich
- Fire Door Replacement in Ipswich
- FD60 Fire Doorsets across Suffolk
- All fire doors in Ipswich