FD60 fire doors in Seaford: how we work
If your fire risk assessment in Seaford has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in BN25 are free and quotes are fixed and itemised.
We cover BN25 and the surrounding area, including Rottingdean. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Seaford
New and replacement fire doors in Seaford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Seaford
Our guide price for FD60 fire doors in Seaford is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Seaford include compartment walls and higher-risk stores.
Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Seaford property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Seaford
Can you work around tenants or staff in Seaford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Seaford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in East Sussex.
What does a Seaford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Seaford
- Rottingdean (7 miles)
- Eastbourne (8 miles)
- Hailsham (9 miles)
- Brighton (11 miles)
- Hove (12 miles)
- Portslade (15 miles)
Other fire doors in Seaford
- Fire Door Replacement in Seaford
- Fire-Rated Screens & Fanlights in Seaford
- Acoustic Fire Doors in Seaford
- FD30 Fire Doorsets in Seaford
- HMO Fire Doors in Seaford
- Commercial & Office Fire Doors in Seaford
- FD30S Smoke Control Doorsets in Seaford
- School & Healthcare Fire Doors in Seaford
- FD60 Fire Doorsets across East Sussex
- All fire doors in Seaford