Our Brighton supply and fit service
We cover Brighton and nearby Hove for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover Brighton and the rest of East Sussex, with surveys arranged around your building's access and occupancy.
Regulations for FD60 fire doors in East Sussex
In Brighton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in East Sussex
Guide prices for FD60 fire doors in Brighton run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are needed
Plant and boiler rooms and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Brighton as elsewhere.
Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Brighton.
Can you work around tenants or staff in Brighton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Brighton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in East Sussex.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Brighton
- Hove (1 mile)
- Portslade (4 miles)
- Rottingdean (4 miles)
- Burgess Hill (9 miles)
- Worthing (11 miles)
- Seaford (11 miles)
Also available in Brighton
- Security Fire Doors in Brighton
- Fire Doors for Homes in Brighton
- School & Healthcare Fire Doors in Brighton
- Fire Door Replacement in Brighton
- Fire-Rated Screens & Fanlights in Brighton
- Composite Fire Doors in Brighton
- Double & Leaf-and-a-Half Fire Doors in Brighton
- HMO Fire Doors in Brighton
- FD60 Fire Doorsets across East Sussex
- All fire doors in Brighton