Getting FD60 fire doors fitted in Chesterfield
Looking for FD60 fire doors in Chesterfield? Our supply and fit service covers S41 and the surrounding area, including Staveley and Dronfield. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Chesterfield is about 23 miles from Derby. Wherever your building is in S41, we arrange survey and fitting dates around access and occupancy.
Regulations for FD60 fire doors in Derbyshire
Fire doors in Chesterfield sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Chesterfield?
Our guide price for FD60 fire doors in Chesterfield is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Chesterfield
In Chesterfield, FD60 fire doors are typically needed in higher-risk stores and stair cores in taller blocks.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you work for landlords and managing agents in Chesterfield?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What does a Chesterfield quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Chesterfield?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Derbyshire.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Chesterfield
- Staveley (3 miles)
- Dronfield (4 miles)
- Sheffield (9 miles)
- Burngreave (10 miles)
- Alfreton (11 miles)
- Sutton-in-Ashfield (11 miles)
Other fire doors in Chesterfield
- Double & Leaf-and-a-Half Fire Doors in Chesterfield
- Fire-Rated Screens & Fanlights in Chesterfield
- Communal & Corridor Fire Doors in Chesterfield
- Security Fire Doors in Chesterfield
- HMO Fire Doors in Chesterfield
- Flat Entrance Fire Doors in Chesterfield
- School & Healthcare Fire Doors in Chesterfield
- Composite Fire Doors in Chesterfield
- FD60 Fire Doorsets across Derbyshire
- All fire doors in Chesterfield