Getting FD60 fire doors fitted in Burngreave
Getting FD60 fire doors right in Burngreave means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our South Yorkshire coverage includes Burngreave and its neighbours Sheffield, Rotherham and Chapeltown; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Burngreave
Because Burngreave is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in South Yorkshire
Our guide price for FD60 fire doors in Burngreave is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Burngreave include compartment walls and plant and boiler rooms.
Sheffield's city-centre apartment and student blocks lead demand, with Rotherham, Doncaster and Barnsley adding warehouses, schools and estates.
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Burngreave
Can you fit just one door in Burngreave?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in South Yorkshire.
Will I get certificates for the doors fitted in Burngreave?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Burngreave.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Sheffield (1 mile)
- Rotherham (5 miles)
- Chapeltown (5 miles)
- Dronfield (6 miles)
- Staveley (10 miles)
- Chesterfield (10 miles)
Also available in Burngreave
- Fire Doors for Homes in Burngreave
- Communal & Corridor Fire Doors in Burngreave
- Fire Door Ironmongery & Closers in Burngreave
- Glazed Fire Doors in Burngreave
- School & Healthcare Fire Doors in Burngreave
- FD90 & FD120 Doorsets in Burngreave
- Flat Entrance Fire Doors in Burngreave
- Fire Door Replacement in Burngreave
- FD60 Fire Doorsets across South Yorkshire
- All fire doors in Burngreave