Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Seaham

We supply and fit FD60 fire doors in Seaham (SR7) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Seaham, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Seaham

If your fire risk assessment in Seaham has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SR7 are free and quotes are fixed and itemised.

Seaham is about 23 miles from Darlington; we cover both, along with Houghton-le-Spring, Sunderland and Peterlee.

Which rules apply in Seaham?

In Seaham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Seaham

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Seaham quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD60 fire doors are needed

Typical uses for FD60 fire doors in Seaham include compartment walls and stair cores in taller blocks.

County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.

  • Compartment walls
  • Stair cores in taller blocks
  • Higher-risk stores
  • Plant and boiler rooms

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your Seaham property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

FD60 fire doors in Seaham: questions

Do you work for landlords and managing agents in Seaham?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Which rules do FD60 fire doors in Seaham need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you work around tenants or staff in Seaham?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Neighbouring areas

Other products in Seaham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.