Our Hawarden supply and fit service
Getting FD60 fire doors right in Hawarden means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover CH5 and the surrounding area, including Deeside. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Hawarden
In Hawarden the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Guide prices in Hawarden
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Hawarden quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are used in Hawarden
In Hawarden, FD60 fire doors are typically needed in higher-risk stores and plant and boiler rooms.
North-east Wales combines Wrexham's city centre and industrial estates with Deeside's manufacturing and coastal resorts such as Rhyl and Colwyn Bay.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Hawarden
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Clwyd
Can you work around tenants or staff in Hawarden?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Hawarden free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Hawarden quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Deeside (1 mile)
- Buckley (2 miles)
- Chester (6 miles)
- Flint (6 miles)
- Ellesmere Port (8 miles)
- Wrexham (10 miles)
More doorsets for Hawarden
- Flat Entrance Fire Doors in Hawarden
- Fire Door Supply & Fit in Hawarden
- Fire-Rated Screens & Fanlights in Hawarden
- Fire Door Ironmongery & Closers in Hawarden
- FD30 Fire Doorsets in Hawarden
- Fire Door Replacement in Hawarden
- Timber Fire Doorsets in Hawarden
- Security Fire Doors in Hawarden
- FD60 Fire Doorsets across Clwyd
- All fire doors in Hawarden