FD60 fire doors in Wrexham: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Wrexham and the rest of Clwyd. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Wrexham is one of the main towns we cover in Clwyd; tell us your dates and we'll arrange a survey.
What the law says in Wrexham
In Wrexham the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Guide prices in Wrexham
Guide prices for FD60 fire doors in Wrexham run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are needed
Wherever they are in Wrexham, FD60 fire doors are most often specified for higher-risk stores and stair cores in taller blocks.
North-east Wales combines Wrexham's city centre and industrial estates with Deeside's manufacturing and coastal resorts such as Rhyl and Colwyn Bay.
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Clwyd
Do you cover Wrexham?
Yes. We survey, supply and fit FD60 fire doors throughout Wrexham and the rest of Clwyd, including LL13 and nearby Rhosllannerchrugog.
What does a Wrexham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Wrexham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Wrexham
- Rhosllannerchrugog (4 miles)
- Buckley (9 miles)
- Hawarden (10 miles)
- Chester (11 miles)
- Deeside (11 miles)
- Flint (15 miles)
Also available in Wrexham
- Double & Leaf-and-a-Half Fire Doors in Wrexham
- Stairwell & Escape Route Doors in Wrexham
- FD30 Fire Doorsets in Wrexham
- Fire Doors for Homes in Wrexham
- Fire Door Replacement in Wrexham
- Fire Exit Doors in Wrexham
- FD30S Smoke Control Doorsets in Wrexham
- School & Healthcare Fire Doors in Wrexham
- FD60 Fire Doorsets across Clwyd
- All fire doors in Wrexham