Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Cannock

We supply and fit communal fire doors in Cannock (WS11) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,600 per pair in Cannock, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Our Cannock supply and fit service

We cover Cannock and nearby Burntwood for communal fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

We cover WS11 and the surrounding area, including Burntwood. Tell us your postcode and preferred dates and we'll confirm a survey slot.

What the law says in Cannock

Because Cannock is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Communal fire doors prices in Cannock

Expect roughly £1,600–£3,200 per pair for communal fire doors, fitted, ex VAT. Your Cannock quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where communal fire doors are needed

Wherever they are in Cannock, communal fire doors are most often specified for sheltered and supported housing and hotels.

Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.

  • Sheltered and supported housing
  • Hotels
  • Student accommodation
  • Blocks of flats

What's in the doorset

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

How it works in Cannock

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Questions about communal fire doors in Cannock

Can you work around tenants or staff in Cannock?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can you fit just one door in Cannock?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.

Do you cover Cannock?

Yes. We survey, supply and fit communal fire doors throughout Cannock and the rest of Staffordshire, including WS11 and nearby Burntwood.

Should communal doors be glazed?

Doors across corridors usually need vision panels so people can see who is on the other side. The glass must be tested in that doorset.

Neighbouring areas

Other products in Cannock

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.