Communal fire doors in Thornaby-on-Tees

Communal & Corridor Fire Doors for Thornaby-on-Tees buildings

Getting communal fire doors right in Thornaby-on-Tees means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Thornaby-on-Tees is about 41 miles from York; we cover both, along with Stockton-on-Tees, Billingham and Middlesbrough.

What the law says in Thornaby-on-Tees

Because Thornaby-on-Tees is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of communal fire doors in North Yorkshire

Our guide price for communal fire doors in Thornaby-on-Tees is £1,600 to £3,200 per pair including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where communal fire doors are used in Thornaby-on-Tees

In Thornaby-on-Tees, communal fire doors are typically needed in blocks of flats and student accommodation.

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

Blocks of flats
Student accommodation
Sheltered and supported housing
Hotels

What's in the doorset

Rating	FD30S typical; FD60S in some lobbies
Configuration	Singles, pairs and leaf-and-a-half
Glazing	Vision panels sized to the doorset's evidence
Hold-open	Alarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
Accessibility	Opening forces and vision panels to accessibility guidance (Approved Document M in England)

Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

What happens next

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Your questions answered

Can you fit just one door in Thornaby-on-Tees?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.

Will I get certificates for the doors fitted in Thornaby-on-Tees?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

What does a Thornaby-on-Tees quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you replace doors while the building is occupied?

Yes. We phase work so escape routes are maintained, and plan each door to be removed and replaced the same day. If that isn't possible, the opening is made secure and we tell you in advance.

Communal & Corridor Fire Doors in Thornaby-on-Tees