Certified FD30S fire doors for Manchester
We cover Manchester and nearby Salford for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Manchester is one of the main towns we cover in Greater Manchester; tell us your dates and we'll arrange a survey.
What the law says in Manchester
New and replacement fire doors in Manchester are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30S fire doors in Greater Manchester
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Manchester are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30S fire doors are needed
In Manchester, FD30S fire doors are typically needed in integral garage doors and cross-corridor doors.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Integral garage doors
- Cross-corridor doors
- Lobby doors in blocks of flats
- Protected stairways
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater Manchester
What does a Manchester quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD30S fire doors in Manchester need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Manchester.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
FD30S Smoke Control Doorsets near Manchester
- Salford (2 miles)
- Old Trafford (2 miles)
- Failsworth (3 miles)
- Droylsden (4 miles)
- Stretford (4 miles)
- Eccles (4 miles)
More doorsets for Manchester
- Double & Leaf-and-a-Half Fire Doors in Manchester
- Composite Fire Doors in Manchester
- Flat Entrance Fire Doors in Manchester
- Steel Fire Doors in Manchester
- Fire Exit Doors in Manchester
- Fire Door Ironmongery & Closers in Manchester
- FD60 Fire Doorsets in Manchester
- Security Fire Doors in Manchester
- FD30S Smoke Control Doorsets across Greater Manchester
- All fire doors in Manchester