Certified FD60 fire doors for Manchester
Fire Rated Doors supplies and fits FD60 fire doors in Manchester, Greater Manchester. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Manchester are booked around your access needs, and we cover the wider Greater Manchester area too.
What the law says in Manchester
Because Manchester is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Manchester
Our guide price for FD60 fire doors in Manchester is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Manchester include stair cores in taller blocks and compartment walls.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Manchester
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater Manchester
Can you work around tenants or staff in Manchester?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Manchester free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Manchester?
Yes. We survey, supply and fit FD60 fire doors throughout Manchester and the rest of Greater Manchester, including M2 and nearby Salford.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Manchester
- Salford (2 miles)
- Old Trafford (2 miles)
- Failsworth (3 miles)
- Droylsden (4 miles)
- Stretford (4 miles)
- Eccles (4 miles)
Other fire doors in Manchester
- FD90 & FD120 Doorsets in Manchester
- Composite Fire Doors in Manchester
- Fire Door Supply & Fit in Manchester
- Flat Entrance Fire Doors in Manchester
- Riser & Service Cupboard Doors in Manchester
- Stairwell & Escape Route Doors in Manchester
- Timber Fire Doorsets in Manchester
- Steel Fire Doors in Manchester
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Manchester