Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Failsworth

We supply and fit FD30S fire doors in Failsworth (M35) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Failsworth, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S fire doors in Failsworth: how we work

We cover Failsworth and nearby Droylsden for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Failsworth is about 3 miles from Manchester; we cover both, along with Droylsden, Chadderton and Ashton-under-Lyne.

Fire door rules in Failsworth

In Failsworth, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD30S fire doors cost in Failsworth?

Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Failsworth are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD30S fire doors are needed

In Failsworth, FD30S fire doors are typically needed in cross-corridor doors and integral garage doors.

Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.

  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats
  • Protected stairways

FD30S Smoke Control Doorsets: key specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Which rules do FD30S fire doors in Failsworth need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How quickly can you survey in Failsworth?

We arrange surveys around your access needs and, where possible, combine Failsworth visits with other work in Greater Manchester. Tell us your preferred dates when you enquire.

Will I get certificates for the doors fitted in Failsworth?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

FD30S Smoke Control Doorsets near Failsworth

Also available in Failsworth

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.