FD30S fire doors in Thamesmead

FD30S Smoke Control Doorsets for Thamesmead buildings

Looking for FD30S fire doors in Thamesmead? Our supply and fit service covers SE28 and the surrounding area, including Barking and Welling. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

We cover SE28 and the surrounding area, including Barking. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Which rules apply in Thamesmead?

Fire doors in Thamesmead sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in Thamesmead

Our guide price for FD30S fire doors in Thamesmead is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD30S fire doors are used in Thamesmead

Wherever they are in Thamesmead, FD30S fire doors are most often specified for integral garage doors and cross-corridor doors.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

Integral garage doors
Cross-corridor doors
Protected stairways
Lobby doors in blocks of flats

Doorset specification

Fire resistance	30 minutes (FD30 / E30)
Smoke control	Tested to BS 476-31.1 or BS EN 1634-3 (Sa)
Seals	Combined intumescent and brush or blade smoke seal
Typical use	Flat entrances, protected stairs, corridor doors
Closer	Overhead or concealed closer to BS EN 1154

Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

Share your FRA or inspection findings
We confirm every door on site
Fixed quote, certified doorsets only
Fitted to the manufacturer's instructions, with photos

Common questions in Greater London

How quickly can you survey in Thamesmead?

We arrange surveys around your access needs and, where possible, combine Thamesmead visits with other work in Greater London. Tell us your preferred dates when you enquire.

Can you work around tenants or staff in Thamesmead?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted in Thamesmead?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

FD30S Smoke Control Doorsets in Thamesmead