Our Ilkeston supply and fit service
We cover Ilkeston and nearby Heanor for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Whether your building is in central Ilkeston or on its edges towards Heanor, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Ilkeston
Fire doors in Ilkeston sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Ilkeston?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Ilkeston are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are needed
Typical uses for FD30S fire doors in Ilkeston include integral garage doors and cross-corridor doors.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Integral garage doors
- Cross-corridor doors
- Protected stairways
- Lobby doors in blocks of flats
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Derbyshire
Do you work for landlords and managing agents in Ilkeston?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Is the survey in Ilkeston free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Ilkeston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
FD30S Smoke Control Doorsets near Ilkeston
- Heanor (4 miles)
- Long Eaton (5 miles)
- Ripley (6 miles)
- Hucknall (6 miles)
- Nottingham (7 miles)
- Arnold (7 miles)
Other fire doors in Ilkeston
- Timber Fire Doorsets in Ilkeston
- Steel Fire Doors in Ilkeston
- Security Fire Doors in Ilkeston
- Fire Door Supply & Fit in Ilkeston
- Riser & Service Cupboard Doors in Ilkeston
- FD60 Fire Doorsets in Ilkeston
- FD90 & FD120 Doorsets in Ilkeston
- Stairwell & Escape Route Doors in Ilkeston
- FD30S Smoke Control Doorsets across Derbyshire
- All fire doors in Ilkeston