FD30 Fire Doorsets for Dagenham buildings
Need FD30 fire doors in Dagenham? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around RM10. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Dagenham is about 13 miles from London; we cover both, along with Becontree, Romford and Hornchurch.
What the law says in Dagenham
Because Dagenham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30 fire doors cost in Dagenham?
Guide prices for FD30 fire doors in Dagenham run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD30 fire doors
In Dagenham, FD30 fire doors are typically needed in hotel corridors and plant rooms and stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Dagenham
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Dagenham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Dagenham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Dagenham.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Becontree (2 miles)
- Romford (2 miles)
- Hornchurch (2 miles)
- Barking (4 miles)
- Thamesmead (4 miles)
- Ilford (4 miles)
More doorsets for Dagenham
- Fire Doors for Homes in Dagenham
- HMO Fire Doors in Dagenham
- Steel Fire Doors in Dagenham
- School & Healthcare Fire Doors in Dagenham
- FD30S Smoke Control Doorsets in Dagenham
- Acoustic Fire Doors in Dagenham
- FD90 & FD120 Doorsets in Dagenham
- Riser & Service Cupboard Doors in Dagenham
- FD30 Fire Doorsets across Greater London
- All fire doors in Dagenham