Certified FD30 fire doors for Bearsden
Fire Rated Doors supplies and fits FD30 fire doors in Bearsden, Glasgow & Dunbartonshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover G61 and the surrounding area, including Clydebank. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Bearsden?
Scotland has its own system: new and replacement fire doors in Bearsden are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
Cost of FD30 fire doors in Glasgow & Dunbartonshire
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Bearsden are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30 fire doors
Wherever they are in Bearsden, FD30 fire doors are most often specified for plant rooms and stores and HMO bedrooms and kitchens.
Glasgow has Scotland's largest stock of tenements and high-rise flats, plus extensive student housing and offices in the city centre.
- Plant rooms and stores
- HMO bedrooms and kitchens
- Hotel corridors
- Offices and retail back-of-house
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Bearsden property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bearsden.
Do you cover Bearsden?
Yes. We survey, supply and fit FD30 fire doors throughout Bearsden and the rest of Glasgow & Dunbartonshire, including G61 and nearby Clydebank.
What does a Bearsden quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Also covering towns near Bearsden
- Clydebank (3 miles)
- Renfrew (4 miles)
- Bishopbriggs (4 miles)
- Glasgow (4 miles)
- Paisley (7 miles)
- Rutherglen (7 miles)
Other fire doors in Bearsden
- FD90 & FD120 Doorsets in Bearsden
- Fire Door Replacement in Bearsden
- Glazed Fire Doors in Bearsden
- Stairwell & Escape Route Doors in Bearsden
- Fire Door Supply & Fit in Bearsden
- Fire Door Ironmongery & Closers in Bearsden
- FD60 Fire Doorsets in Bearsden
- Riser & Service Cupboard Doors in Bearsden
- FD30 Fire Doorsets across Glasgow & Dunbartonshire
- All fire doors in Bearsden