Our Edinburgh supply and fit service
We fit FD30 doorsets for flats, offices, HMOs and corridors in Edinburgh and the rest of Edinburgh & the Lothians. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Surveys in Edinburgh are booked around your access needs, and we cover the wider Edinburgh & the Lothians area too.
Which rules apply in Edinburgh?
Scotland has its own system: new and replacement fire doors in Edinburgh are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
What do FD30 fire doors cost in Edinburgh?
Guide prices for FD30 fire doors in Edinburgh run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Edinburgh
Plant rooms and stores and hotel corridors are among the most common settings for FD30 fire doors, in Edinburgh as elsewhere.
Edinburgh's tenements and conversions, student housing and offices drive demand, with Livingston and the Lothian towns adding newer estates.
- Plant rooms and stores
- Hotel corridors
- HMO bedrooms and kitchens
- Offices and retail back-of-house
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30 fire doors in Edinburgh
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Edinburgh.
Can you fit just one door in Edinburgh?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Edinburgh & the Lothians.
Do you cover Edinburgh?
Yes. We survey, supply and fit FD30 fire doors throughout Edinburgh and the rest of Edinburgh & the Lothians, including EH2 and nearby Musselburgh.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Neighbouring areas
- Musselburgh (6 miles)
- Kirkcaldy (11 miles)
- Dunfermline (13 miles)
- Livingston (13 miles)
- Glenrothes (17 miles)
- Bathgate (17 miles)
Also available in Edinburgh
- Fire Door Replacement in Edinburgh
- Commercial & Office Fire Doors in Edinburgh
- Fire Doors for Homes in Edinburgh
- Stairwell & Escape Route Doors in Edinburgh
- Timber Fire Doorsets in Edinburgh
- Flat Entrance Fire Doors in Edinburgh
- FD60 Fire Doorsets in Edinburgh
- FD90 & FD120 Doorsets in Edinburgh
- FD30 Fire Doorsets across Edinburgh & the Lothians
- All fire doors in Edinburgh
