Commercial fire doors in Newcastle upon Tyne: how we work
Getting commercial fire doors right in Newcastle upon Tyne means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Surveys in Newcastle upon Tyne are booked around your access needs, and we cover the wider Tyne and Wear area too.
What the law says in Newcastle upon Tyne
New and replacement fire doors in Newcastle upon Tyne are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of commercial fire doors in Tyne and Wear
Budget around £850 to £1,500 per single doorset for commercial fire doors supplied and fitted in Newcastle upon Tyne, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where commercial fire doors are used in Newcastle upon Tyne
In Newcastle upon Tyne, commercial fire doors are typically needed in retail units and office fit-outs.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Retail units
- Office fit-outs
- Restaurants and commercial kitchens
- Hotels
What you get with each doorset
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Newcastle upon Tyne quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Newcastle upon Tyne.
Can you fit just one door in Newcastle upon Tyne?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.
Do office fire doors need vision panels?
Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.
Neighbouring areas
- Gateshead (1 mile)
- Gosforth (2 miles)
- Felling (2 miles)
- Wallsend (3 miles)
- Hebburn (4 miles)
- Jarrow (5 miles)
Other products in Newcastle upon Tyne
- Timber Fire Doorsets in Newcastle upon Tyne
- Double & Leaf-and-a-Half Fire Doors in Newcastle upon Tyne
- FD60 Fire Doorsets in Newcastle upon Tyne
- Fire Exit Doors in Newcastle upon Tyne
- FD90 & FD120 Doorsets in Newcastle upon Tyne
- HMO Fire Doors in Newcastle upon Tyne
- Fire Door Supply & Fit in Newcastle upon Tyne
- Flat Entrance Fire Doors in Newcastle upon Tyne
- Commercial & Office Fire Doors across Tyne and Wear
- All fire doors in Newcastle upon Tyne