Certified commercial fire doors for Cirencester
Getting commercial fire doors right in Cirencester means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Cirencester is about 16 miles from Gloucester. Wherever your building is in GL7, we arrange survey and fitting dates around access and occupancy.
Regulations for commercial fire doors in Gloucestershire
In Cirencester, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of commercial fire doors in Gloucestershire
Our guide for commercial fire doors is £850–£1,500 per single doorset fitted, ex VAT. Quotes for Cirencester are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Cirencester
Restaurants and commercial kitchens and retail units are among the most common settings for commercial fire doors, in Cirencester as elsewhere.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Restaurants and commercial kitchens
- Retail units
- Office fit-outs
- Hotels
What you get with each doorset
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Cirencester property
- Door-by-door schedule and fixed price
- Installation and handover pack
Commercial fire doors in Cirencester: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cirencester.
Is the survey in Cirencester free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Cirencester?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do office fire doors need vision panels?
Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.
Also covering towns near Cirencester
- Stroud (10 miles)
- Cheltenham (13 miles)
- Swindon (14 miles)
- Gloucester (16 miles)
- Chippenham (19 miles)
- Tewkesbury (20 miles)
Other products in Cirencester
- Double & Leaf-and-a-Half Fire Doors in Cirencester
- Fire Exit Doors in Cirencester
- FD60 Fire Doorsets in Cirencester
- Communal & Corridor Fire Doors in Cirencester
- School & Healthcare Fire Doors in Cirencester
- Fire Door Ironmongery & Closers in Cirencester
- HMO Fire Doors in Cirencester
- FD90 & FD120 Doorsets in Cirencester
- Commercial & Office Fire Doors across Gloucestershire
- All fire doors in Cirencester