Our Wallsend supply and fit service
Getting FD30 fire doors right in Wallsend means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Wallsend surveys with other visits in Tyne and Wear, such as Hebburn and Jarrow, which helps keep survey dates flexible.
What the law says in Wallsend
New and replacement fire doors in Wallsend are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD30 fire doors prices in Wallsend
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Wallsend quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD30 fire doors are needed
Wherever they are in Wallsend, FD30 fire doors are most often specified for plant rooms and stores and offices and retail back-of-house.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Wallsend
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30 fire doors in Wallsend
Can you work around tenants or staff in Wallsend?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Wallsend quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Wallsend?
We arrange surveys around your access needs and, where possible, combine Wallsend visits with other work in Tyne and Wear. Tell us your preferred dates when you enquire.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Neighbouring areas
- Hebburn (1 mile)
- Jarrow (2 miles)
- Felling (3 miles)
- Gosforth (3 miles)
- Gateshead (3 miles)
- Newcastle upon Tyne (3 miles)
Also available in Wallsend
- Flat Entrance Fire Doors in Wallsend
- FD30S Smoke Control Doorsets in Wallsend
- Double & Leaf-and-a-Half Fire Doors in Wallsend
- Fire Door Supply & Fit in Wallsend
- FD90 & FD120 Doorsets in Wallsend
- Fire Exit Doors in Wallsend
- Fire Door Replacement in Wallsend
- Timber Fire Doorsets in Wallsend
- FD30 Fire Doorsets across Tyne and Wear
- All fire doors in Wallsend