Our Welling supply and fit service
Getting riser cupboard fire doors right in Welling means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Welling is about 11 miles from London. Wherever your building is in DA16, we arrange survey and fitting dates around access and occupancy.
Regulations for riser cupboard fire doors in Greater London
In Welling, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Welling
Our guide price for riser cupboard fire doors in Welling is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where riser cupboard fire doors are used in Welling
Wherever they are in Welling, riser cupboard fire doors are most often specified for bin and store cupboards and plumbing ducts.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Bin and store cupboards
- Plumbing ducts
- Electrical and data risers
- Meter cupboards
Doorset specification
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Is the survey in Welling free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Welling?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Welling?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What rating does a riser door need?
In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.
Also covering towns near Welling
- Bexley (2 miles)
- Eltham (2 miles)
- Thamesmead (3 miles)
- Blackheath (4 miles)
- Dartford (5 miles)
- Barking (5 miles)
Also available in Welling
- Fire Door Replacement in Welling
- Fire Doors for Homes in Welling
- Flat Entrance Fire Doors in Welling
- Security Fire Doors in Welling
- Fire Door Supply & Fit in Welling
- FD30 Fire Doorsets in Welling
- Composite Fire Doors in Welling
- HMO Fire Doors in Welling
- Riser & Service Cupboard Doors across Greater London
- All fire doors in Welling