Flat Entrance Fire Doors for Billericay buildings
Need flat entrance fire doors in Billericay? We supply and fit complete certified doorsets across Essex, starting with a free measure survey in and around CM12. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Our Essex coverage includes Billericay and its neighbours Basildon, Wickford and Brentwood; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Billericay
Fire doors in Billericay sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do flat entrance fire doors cost in Billericay?
Expect roughly £1,250–£2,300 per door for flat entrance fire doors, fitted, ex VAT. Your Billericay quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where flat entrance fire doors are needed
Typical uses for flat entrance fire doors in Billericay include supported housing and student and build-to-rent blocks.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Supported housing
- Student and build-to-rent blocks
- Converted buildings with shared stairs
- Blocks of flats
What you get with each doorset
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
How it works in Billericay
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about flat entrance fire doors in Billericay
What does a Billericay quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Billericay.
Will I get certificates for the doors fitted in Billericay?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Who is responsible for flat front fire doors?
Usually the freeholder or managing agent as the responsible person, but leases vary — some make the leaseholder responsible for the door. Either way, it falls within the building's fire risk assessment.
Nearby towns we cover
- Basildon (4 miles)
- Wickford (4 miles)
- Brentwood (5 miles)
- Pitsea (6 miles)
- Stanford-le-Hope (7 miles)
- Chelmsford (7 miles)
Other fire doors in Billericay
- FD30 Fire Doorsets in Billericay
- Fire Door Supply & Fit in Billericay
- Steel Fire Doors in Billericay
- HMO Fire Doors in Billericay
- FD30S Smoke Control Doorsets in Billericay
- Stairwell & Escape Route Doors in Billericay
- Fire Door Replacement in Billericay
- Commercial & Office Fire Doors in Billericay
- Flat Entrance Fire Doors across Essex
- All fire doors in Billericay