Our Bromsgrove supply and fit service
For landlords, managing agents, businesses and homeowners in Bromsgrove, we provide fire door closers, hinges and hold-open devices with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Bromsgrove is about 12 miles from Worcester; we cover both, along with Redditch, Droitwich and Bartley Green.
Fire door rules in Bromsgrove
New and replacement fire doors in Bromsgrove are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Bromsgrove
Our guide price for fire door closers and ironmongery in Bromsgrove is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Bromsgrove include busy corridors needing hold-open and seal and signage replacement.
Worcestershire mixes Worcester's student and city-centre housing with Redditch's industry and Malvern's schools and care homes.
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about fire door closers and ironmongery in Bromsgrove
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bromsgrove.
Which rules do fire door closers and ironmongery in Bromsgrove need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Bromsgrove?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Also covering towns near Bromsgrove
- Redditch (5 miles)
- Droitwich (6 miles)
- Bartley Green (7 miles)
- Halesowen (8 miles)
- Kidderminster (9 miles)
- Stourbridge (9 miles)
Other products in Bromsgrove
- Commercial & Office Fire Doors in Bromsgrove
- FD90 & FD120 Doorsets in Bromsgrove
- Composite Fire Doors in Bromsgrove
- Fire Door Replacement in Bromsgrove
- Fire Door Supply & Fit in Bromsgrove
- FD30 Fire Doorsets in Bromsgrove
- Timber Fire Doorsets in Bromsgrove
- Stairwell & Escape Route Doors in Bromsgrove
- Fire Door Ironmongery & Closers across Worcestershire
- All fire doors in Bromsgrove