Our Bromsgrove supply and fit service
Looking for FD90 and FD120 fire doors in Bromsgrove? Our supply and fit service covers B61 and the surrounding area, including Redditch and Droitwich. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
We cover B61 and the surrounding area, including Redditch. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Bromsgrove
New and replacement fire doors in Bromsgrove are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Bromsgrove
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Bromsgrove quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Bromsgrove
Typical uses for FD90 and FD120 fire doors in Bromsgrove include separating walls with long ratings and transformer and switch rooms.
Worcestershire mixes Worcester's student and city-centre housing with Redditch's industry and Malvern's schools and care homes.
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
- Generator rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Worcestershire
Is the survey in Bromsgrove free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bromsgrove.
Do you cover Bromsgrove?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Bromsgrove and the rest of Worcestershire, including B61 and nearby Redditch.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Redditch (5 miles)
- Droitwich (6 miles)
- Bartley Green (7 miles)
- Halesowen (8 miles)
- Kidderminster (9 miles)
- Stourbridge (9 miles)
Other products in Bromsgrove
- FD30 Fire Doorsets in Bromsgrove
- Flat Entrance Fire Doors in Bromsgrove
- Fire Door Supply & Fit in Bromsgrove
- Timber Fire Doorsets in Bromsgrove
- Fire Door Ironmongery & Closers in Bromsgrove
- FD60 Fire Doorsets in Bromsgrove
- Fire Exit Doors in Bromsgrove
- Security Fire Doors in Bromsgrove
- FD90 & FD120 Doorsets across Worcestershire
- All fire doors in Bromsgrove