Fire door closers and ironmongery in Salisbury: how we work
We fit fire door closers, hinges and hold-open devices in Salisbury and the rest of Wiltshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover SP1 and the surrounding area, including Andover. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Salisbury
Fire doors in Salisbury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do fire door closers and ironmongery cost in Salisbury?
Our guide price for fire door closers and ironmongery in Salisbury is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Salisbury
In Salisbury, fire door closers and ironmongery are typically needed in busy corridors needing hold-open and failed closers and hinges.
Wiltshire is anchored by Swindon's offices and warehouses, with Salisbury, Trowbridge and Chippenham adding period conversions and schools.
- Busy corridors needing hold-open
- Failed closers and hinges
- Seal and signage replacement
- Access control preparation
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Which rules do fire door closers and ironmongery in Salisbury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Salisbury?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Salisbury and the rest of Wiltshire, including SP1 and nearby Andover.
Can you work around tenants or staff in Salisbury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Nearby towns we cover
- Andover (16 miles)
- Totton (17 miles)
- Southampton (20 miles)
- Eastleigh (20 miles)
- Winchester (20 miles)
- New Milton (22 miles)
Other products in Salisbury
- School & Healthcare Fire Doors in Salisbury
- Fire Exit Doors in Salisbury
- FD60 Fire Doorsets in Salisbury
- Double & Leaf-and-a-Half Fire Doors in Salisbury
- Acoustic Fire Doors in Salisbury
- HMO Fire Doors in Salisbury
- FD30S Smoke Control Doorsets in Salisbury
- Flat Entrance Fire Doors in Salisbury
- Fire Door Ironmongery & Closers across Wiltshire
- All fire doors in Salisbury