Our Winchester supply and fit service
We fit fire door closers, hinges and hold-open devices in Winchester and the rest of Hampshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Winchester is about 12 miles from Southampton; we cover both, along with Eastleigh, Southampton and Totton.
Regulations for fire door closers and ironmongery in Hampshire
Because Winchester is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Winchester
Our guide price for fire door closers and ironmongery in Winchester is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where fire door closers and ironmongery are used in Winchester
Typical uses for fire door closers and ironmongery in Winchester include busy corridors needing hold-open and failed closers and hinges.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Busy corridors needing hold-open
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Winchester property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about fire door closers and ironmongery in Winchester
Is the survey in Winchester free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How quickly can you survey in Winchester?
We arrange surveys around your access needs and, where possible, combine Winchester visits with other work in Hampshire. Tell us your preferred dates when you enquire.
Can you fit just one door in Winchester?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Winchester
- Eastleigh (7 miles)
- Southampton (12 miles)
- Totton (12 miles)
- Andover (12 miles)
- Hythe (15 miles)
- Fareham (16 miles)
Also available in Winchester
- Fire Doors for Homes in Winchester
- Composite Fire Doors in Winchester
- Commercial & Office Fire Doors in Winchester
- Flat Entrance Fire Doors in Winchester
- Communal & Corridor Fire Doors in Winchester
- Fire Exit Doors in Winchester
- Security Fire Doors in Winchester
- Stairwell & Escape Route Doors in Winchester
- Fire Door Ironmongery & Closers across Hampshire
- All fire doors in Winchester