Certified fire door closers and ironmongery for Shipley
We fit fire door closers, hinges and hold-open devices in Shipley and the rest of West Yorkshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Shipley is about 9 miles from Leeds. Wherever your building is in BD18, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Shipley
Fire doors in Shipley sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of fire door closers and ironmongery in West Yorkshire
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Shipley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Shipley include busy corridors needing hold-open and access control preparation.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Shipley property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Do you work for landlords and managing agents in Shipley?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Shipley.
Do you cover Shipley?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Shipley and the rest of West Yorkshire, including BD18 and nearby Bradford.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Nearby towns we cover
- Bradford (2 miles)
- Guiseley (4 miles)
- Yeadon (4 miles)
- Pudsey (5 miles)
- Keighley (6 miles)
- Cleckheaton (8 miles)
Other fire doors in Shipley
- Riser & Service Cupboard Doors in Shipley
- Fire Exit Doors in Shipley
- Flat Entrance Fire Doors in Shipley
- Fire Door Replacement in Shipley
- Commercial & Office Fire Doors in Shipley
- Fire-Rated Screens & Fanlights in Shipley
- Stairwell & Escape Route Doors in Shipley
- Timber Fire Doorsets in Shipley
- Fire Door Ironmongery & Closers across West Yorkshire
- All fire doors in Shipley