Our Aston supply and fit service
We fit fire door closers, hinges and hold-open devices in Aston and the rest of West Midlands. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Aston is about 1 mile from Birmingham; we cover both, along with Birmingham, Washwood Heath and Smethwick.
Which rules apply in Aston?
Fire doors in Aston sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Fire door closers and ironmongery prices in Aston
Our guide price for fire door closers and ironmongery in Aston is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are needed
In Aston, fire door closers and ironmongery are typically needed in access control preparation and seal and signage replacement.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in West Midlands
Will I get certificates for the doors fitted in Aston?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Aston?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Aston and the rest of West Midlands, including B6 and nearby Birmingham.
Can you work around tenants or staff in Aston?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Aston
- Birmingham (1 mile)
- Washwood Heath (2 miles)
- Smethwick (4 miles)
- Acocks Green (4 miles)
- West Bromwich (5 miles)
- Sutton Coldfield (6 miles)
More doorsets for Aston
- Security Fire Doors in Aston
- Steel Fire Doors in Aston
- Acoustic Fire Doors in Aston
- Double & Leaf-and-a-Half Fire Doors in Aston
- Stairwell & Escape Route Doors in Aston
- HMO Fire Doors in Aston
- FD30 Fire Doorsets in Aston
- Fire-Rated Screens & Fanlights in Aston
- Fire Door Ironmongery & Closers across West Midlands
- All fire doors in Aston