Certified fire door closers and ironmongery for Swansea
We fit fire door closers, hinges and hold-open devices in Swansea and the rest of West Glamorgan. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Surveys in Swansea are booked around your access needs, and we cover the wider West Glamorgan area too.
What the law says in Swansea
Fire doors in Swansea are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.
Guide prices in Swansea
Our guide price for fire door closers and ironmongery in Swansea is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need fire door closers and ironmongery
In Swansea, fire door closers and ironmongery are typically needed in access control preparation and failed closers and hinges.
Swansea's city-centre flats, university buildings and the industrial towns of Neath and Port Talbot make up much of West Glamorgan's work.
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Swansea property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about fire door closers and ironmongery in Swansea
Can you work around tenants or staff in Swansea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How quickly can you survey in Swansea?
We arrange surveys around your access needs and, where possible, combine Swansea visits with other work in West Glamorgan. Tell us your preferred dates when you enquire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Swansea.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Briton Ferry (6 miles)
- Gorseinon (6 miles)
- Neath (7 miles)
- Llanelli (11 miles)
- Ammanford (12 miles)
- Maesteg (12 miles)
Other products in Swansea
- Flat Entrance Fire Doors in Swansea
- Fire-Rated Screens & Fanlights in Swansea
- Steel Fire Doors in Swansea
- Stairwell & Escape Route Doors in Swansea
- Fire Door Replacement in Swansea
- Fire Door Supply & Fit in Swansea
- FD90 & FD120 Doorsets in Swansea
- School & Healthcare Fire Doors in Swansea
- Fire Door Ironmongery & Closers across West Glamorgan
- All fire doors in Swansea