Our Loughborough supply and fit service
We fit fire door closers, hinges and hold-open devices in Loughborough and the rest of Leicestershire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Loughborough is about 9 miles from Leicester; we cover both, along with Coalville, Leicester and Long Eaton.
Regulations for fire door closers and ironmongery in Leicestershire
New and replacement fire doors in Loughborough are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Loughborough?
Our guide price for fire door closers and ironmongery in Loughborough is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where fire door closers and ironmongery are needed
Failed closers and hinges and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Loughborough as elsewhere.
Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Loughborough
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Loughborough: questions
What does a Loughborough quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Loughborough?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do fire door closers and ironmongery in Loughborough need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Fire Door Ironmongery & Closers near Loughborough
- Coalville (7 miles)
- Leicester (9 miles)
- Long Eaton (9 miles)
- West Bridgford (12 miles)
- Oadby (12 miles)
- Nottingham (13 miles)
Other products in Loughborough
- Composite Fire Doors in Loughborough
- Flat Entrance Fire Doors in Loughborough
- Commercial & Office Fire Doors in Loughborough
- Fire Doors for Homes in Loughborough
- Acoustic Fire Doors in Loughborough
- Fire Exit Doors in Loughborough
- Stairwell & Escape Route Doors in Loughborough
- HMO Fire Doors in Loughborough
- Fire Door Ironmongery & Closers across Leicestershire
- All fire doors in Loughborough