Certified fire door closers and ironmongery for Burnley
We fit fire door closers, hinges and hold-open devices in Burnley and the rest of Lancashire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover BB10 and the surrounding area, including Nelson. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Burnley?
Because Burnley is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Burnley
Guide prices for fire door closers and ironmongery in Burnley run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Burnley
In Burnley, fire door closers and ironmongery are typically needed in busy corridors needing hold-open and access control preparation.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you work for landlords and managing agents in Burnley?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Burnley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Burnley.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Burnley
- Nelson (2 miles)
- Colne (5 miles)
- Accrington (6 miles)
- Rawtenstall (7 miles)
- Blackburn (11 miles)
- Darwen (12 miles)
Other fire doors in Burnley
- Riser & Service Cupboard Doors in Burnley
- FD90 & FD120 Doorsets in Burnley
- School & Healthcare Fire Doors in Burnley
- Communal & Corridor Fire Doors in Burnley
- Acoustic Fire Doors in Burnley
- Fire Door Replacement in Burnley
- Composite Fire Doors in Burnley
- Flat Entrance Fire Doors in Burnley
- Fire Door Ironmongery & Closers across Lancashire
- All fire doors in Burnley