Fire door closers and ironmongery in Farnborough: how we work
Fire Rated Doors supplies and fits fire door closers and ironmongery in Farnborough, Hampshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Farnborough surveys with other visits in Hampshire, such as Camberley and Aldershot, which helps keep survey dates flexible.
Which rules apply in Farnborough?
Fire doors in Farnborough sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Farnborough
Our guide price for fire door closers and ironmongery in Farnborough is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Farnborough
In Farnborough, fire door closers and ironmongery are typically needed in access control preparation and failed closers and hinges.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Fire door closers and ironmongery in Farnborough: questions
Can you work around tenants or staff in Farnborough?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Farnborough?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Farnborough and the rest of Hampshire, including GU14 and nearby Camberley.
Which rules do fire door closers and ironmongery in Farnborough need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Neighbouring areas
- Camberley (3 miles)
- Aldershot (3 miles)
- Fleet (4 miles)
- Sandhurst (4 miles)
- Yateley (4 miles)
- Crowthorne (6 miles)
Other fire doors in Farnborough
- Composite Fire Doors in Farnborough
- Riser & Service Cupboard Doors in Farnborough
- FD60 Fire Doorsets in Farnborough
- Acoustic Fire Doors in Farnborough
- School & Healthcare Fire Doors in Farnborough
- FD30 Fire Doorsets in Farnborough
- Fire-Rated Screens & Fanlights in Farnborough
- Double & Leaf-and-a-Half Fire Doors in Farnborough
- Fire Door Ironmongery & Closers across Hampshire
- All fire doors in Farnborough