Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
BS EN 1154BS EN 1935BS EN 1155

Fire Door Ironmongery & Closers in Sandhurst

We supply and fit fire door closers and ironmongery in Sandhurst (GU47) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £120 per item in Sandhurst, supplied & fitted, ex VAT

Overhead door closer fitted to a white fire door and frame

Getting fire door closers and ironmongery fitted in Sandhurst

We cover Sandhurst and nearby Crowthorne for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Sandhurst is about 11 miles from Reading; we cover both, along with Crowthorne, Yateley and Camberley.

Which rules apply in Sandhurst?

Because Sandhurst is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

What do fire door closers and ironmongery cost in Sandhurst?

Our guide price for fire door closers and ironmongery in Sandhurst is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Typical uses in Sandhurst

Wherever they are in Sandhurst, fire door closers and ironmongery are most often specified for seal and signage replacement and failed closers and hinges.

Berkshire's office parks around Reading, Slough and Bracknell sit alongside a growing number of town-centre apartment blocks.

  • Seal and signage replacement
  • Failed closers and hinges
  • Access control preparation
  • Busy corridors needing hold-open

What's in the doorset

ClosersOverhead and concealed closers to BS EN 1154
HingesCE/UKCA-marked butt hinges to BS EN 1935
Hold-openElectromagnetic and free-swing devices to BS EN 1155
Locks & latchesTo BS EN 12209, tested with the doorset
Seals & signsIntumescent and smoke seals; mandatory fire door signage
Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Berkshire

Can you work around tenants or staff in Sandhurst?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Sandhurst.

Can you fit just one door in Sandhurst?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Berkshire.

Do you install hold-open devices?

We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.

Fire Door Ironmongery & Closers near Sandhurst

Also available in Sandhurst

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.