Our Brent supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Brent, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Brent is about 8 miles from London; we cover both, along with Wembley, Harrow and Greenford.
Which rules apply in Brent?
Because Brent is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Brent?
Guide prices for fire door closers and ironmongery in Brent run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need fire door closers and ironmongery
Wherever they are in Brent, fire door closers and ironmongery are most often specified for access control preparation and busy corridors needing hold-open.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Access control preparation
- Busy corridors needing hold-open
- Seal and signage replacement
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Brent
- Tell us about the doors — photos help
- Free measure survey at your Brent property
- Door-by-door schedule and fixed price
- Installation and handover pack
Fire door closers and ironmongery in Brent: questions
Do you work for landlords and managing agents in Brent?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Brent?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Brent?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Also covering towns near Brent
- Wembley (under a mile)
- Harrow (2 miles)
- Greenford (3 miles)
- Northolt (3 miles)
- Acton (3 miles)
- Willesden (3 miles)
Also available in Brent
- Acoustic Fire Doors in Brent
- FD30S Smoke Control Doorsets in Brent
- Glazed Fire Doors in Brent
- Fire Doors for Homes in Brent
- Double & Leaf-and-a-Half Fire Doors in Brent
- Fire Door Replacement in Brent
- Steel Fire Doors in Brent
- FD90 & FD120 Doorsets in Brent
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Brent