Fire Door Ironmongery & Closers for Wickford buildings
Looking for fire door closers and ironmongery in Wickford? Our supply and fit service covers SS12 and the surrounding area, including Pitsea and Rayleigh. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Whether your building is in central Wickford or on its edges towards Pitsea, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Wickford
New and replacement fire doors in Wickford are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Wickford
Guide prices for fire door closers and ironmongery in Wickford run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Wickford
In Wickford, fire door closers and ironmongery are typically needed in access control preparation and failed closers and hinges.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Wickford property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Essex
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wickford.
Can you fit just one door in Wickford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Essex.
What does a Wickford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Fire Door Ironmongery & Closers near Wickford
- Pitsea (3 miles)
- Rayleigh (4 miles)
- Basildon (4 miles)
- South Benfleet (4 miles)
- Billericay (4 miles)
- Canvey Island (7 miles)
Also available in Wickford
- Stairwell & Escape Route Doors in Wickford
- Commercial & Office Fire Doors in Wickford
- FD30 Fire Doorsets in Wickford
- Double & Leaf-and-a-Half Fire Doors in Wickford
- Fire Exit Doors in Wickford
- Fire-Rated Screens & Fanlights in Wickford
- Timber Fire Doorsets in Wickford
- Riser & Service Cupboard Doors in Wickford
- Fire Door Ironmongery & Closers across Essex
- All fire doors in Wickford