Our Brentwood supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Brentwood, Essex. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover CM14 and the surrounding area, including Billericay. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Essex
New and replacement fire doors in Brentwood are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Brentwood
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Brentwood are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are needed
In Brentwood, fire door closers and ironmongery are typically needed in failed closers and hinges and busy corridors needing hold-open.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
What does a Brentwood quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Brentwood?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Will I get certificates for the doors fitted in Brentwood?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Brentwood
- Billericay (5 miles)
- Hornchurch (6 miles)
- Romford (6 miles)
- Basildon (7 miles)
- Dagenham (7 miles)
- South Ockendon (8 miles)
Other products in Brentwood
- Composite Fire Doors in Brentwood
- Fire Exit Doors in Brentwood
- Double & Leaf-and-a-Half Fire Doors in Brentwood
- FD60 Fire Doorsets in Brentwood
- FD30S Smoke Control Doorsets in Brentwood
- Commercial & Office Fire Doors in Brentwood
- Glazed Fire Doors in Brentwood
- Fire Door Replacement in Brentwood
- Fire Door Ironmongery & Closers across Essex
- All fire doors in Brentwood