Our Plymstock supply and fit service
We cover Plymstock and nearby Plymouth for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Plymstock surveys with other visits in Devon, such as Plymouth and Paignton, which helps keep survey dates flexible.
Regulations for fire door closers and ironmongery in Devon
Because Plymstock is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Plymstock?
Our guide price for fire door closers and ironmongery in Plymstock is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need fire door closers and ironmongery
In Plymstock, fire door closers and ironmongery are typically needed in seal and signage replacement and access control preparation.
Devon's demand comes from Plymouth's post-war city centre and naval estate, Exeter's offices and student housing, and coastal hotels.
- Seal and signage replacement
- Access control preparation
- Busy corridors needing hold-open
- Failed closers and hinges
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Devon
Which rules do fire door closers and ironmongery in Plymstock need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Plymstock?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Plymstock and the rest of Devon, including PL9 and nearby Plymouth.
Will I get certificates for the doors fitted in Plymstock?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Neighbouring areas
- Plymouth (2 miles)
- Paignton (24 miles)
- Newton Abbot (24 miles)
- Torquay (26 miles)
- St Austell (30 miles)
- Exmouth (35 miles)
Also available in Plymstock
- Riser & Service Cupboard Doors in Plymstock
- Commercial & Office Fire Doors in Plymstock
- School & Healthcare Fire Doors in Plymstock
- Fire Exit Doors in Plymstock
- Stairwell & Escape Route Doors in Plymstock
- FD30 Fire Doorsets in Plymstock
- Steel Fire Doors in Plymstock
- FD90 & FD120 Doorsets in Plymstock
- Fire Door Ironmongery & Closers across Devon
- All fire doors in Plymstock