Our Whitehaven supply and fit service
Need fire door closers and ironmongery in Whitehaven? We supply and fit complete certified doorsets across Cumbria, starting with a free measure survey in and around CA28. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Whitehaven is about 35 miles from Carlisle. Wherever your building is in CA28, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Whitehaven
New and replacement fire doors in Whitehaven are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Whitehaven
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Whitehaven are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Whitehaven
Wherever they are in Whitehaven, fire door closers and ironmongery are most often specified for seal and signage replacement and failed closers and hinges.
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
What does a Whitehaven quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Whitehaven need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover Whitehaven?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Whitehaven and the rest of Cumbria, including CA28 and nearby Workington.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Fire Door Ironmongery & Closers near Whitehaven
- Workington (7 miles)
- Barrow-in-Furness (34 miles)
- Carlisle (35 miles)
- Dumfries (36 miles)
- Kendal (37 miles)
- Morecambe (44 miles)
Also available in Whitehaven
- Stairwell & Escape Route Doors in Whitehaven
- Communal & Corridor Fire Doors in Whitehaven
- Commercial & Office Fire Doors in Whitehaven
- Acoustic Fire Doors in Whitehaven
- HMO Fire Doors in Whitehaven
- FD30S Smoke Control Doorsets in Whitehaven
- Timber Fire Doorsets in Whitehaven
- School & Healthcare Fire Doors in Whitehaven
- Fire Door Ironmongery & Closers across Cumbria
- All fire doors in Whitehaven