Our Barrow-in-Furness supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Barrow-in-Furness, Cumbria. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Barrow-in-Furness is about 55 miles from Carlisle; we cover both, along with Morecambe, Fleetwood and Lancaster.
Fire door rules in Barrow-in-Furness
Fire doors in Barrow-in-Furness sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Fire door closers and ironmongery prices in Barrow-in-Furness
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Barrow-in-Furness are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Barrow-in-Furness
In Barrow-in-Furness, fire door closers and ironmongery are typically needed in seal and signage replacement and busy corridors needing hold-open.
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you cover Barrow-in-Furness?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Barrow-in-Furness and the rest of Cumbria, including LA14 and nearby Morecambe.
Can you work around tenants or staff in Barrow-in-Furness?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Barrow-in-Furness.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Barrow-in-Furness
- Morecambe (15 miles)
- Fleetwood (16 miles)
- Lancaster (18 miles)
- Thornton-Cleveleys (19 miles)
- Blackpool (22 miles)
- Kendal (24 miles)
Other fire doors in Barrow-in-Furness
- Composite Fire Doors in Barrow-in-Furness
- Security Fire Doors in Barrow-in-Furness
- Commercial & Office Fire Doors in Barrow-in-Furness
- Stairwell & Escape Route Doors in Barrow-in-Furness
- School & Healthcare Fire Doors in Barrow-in-Furness
- HMO Fire Doors in Barrow-in-Furness
- FD60 Fire Doorsets in Barrow-in-Furness
- Riser & Service Cupboard Doors in Barrow-in-Furness
- Fire Door Ironmongery & Closers across Cumbria
- All fire doors in Barrow-in-Furness