Certified FD90 and FD120 fire doors for Garston
If your fire risk assessment in Garston has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in L19 are free and quotes are fixed and itemised.
Our Merseyside coverage includes Garston and its neighbours Speke, Halewood and Ellesmere Port; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Garston
In Garston, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Merseyside
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Garston quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are used in Garston
In Garston, FD90 and FD120 fire doors are typically needed in generator rooms and transformer and switch rooms.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Garston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Garston free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Garston?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Speke (2 miles)
- Halewood (3 miles)
- Ellesmere Port (4 miles)
- Bebington (5 miles)
- Huyton (6 miles)
- Liverpool (6 miles)
Other fire doors in Garston
- FD30 Fire Doorsets in Garston
- Fire Doors for Homes in Garston
- Stairwell & Escape Route Doors in Garston
- Communal & Corridor Fire Doors in Garston
- FD30S Smoke Control Doorsets in Garston
- Fire Exit Doors in Garston
- FD60 Fire Doorsets in Garston
- Fire Door Replacement in Garston
- FD90 & FD120 Doorsets across Merseyside
- All fire doors in Garston