Our Stroud supply and fit service
Need FD90 and FD120 fire doors in Stroud? We supply and fit complete certified doorsets across Gloucestershire, starting with a free measure survey in and around GL6. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Our Gloucestershire coverage includes Stroud and its neighbours Gloucester, Cirencester and Cheltenham; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Stroud?
Fire doors in Stroud sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Stroud?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Stroud quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Stroud
In Stroud, FD90 and FD120 fire doors are typically needed in high fire-load stores and generator rooms.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD90 and FD120 fire doors in Stroud
Do you work for landlords and managing agents in Stroud?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stroud.
Is the survey in Stroud free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Stroud
- Gloucester (8 miles)
- Cirencester (10 miles)
- Cheltenham (12 miles)
- Tewkesbury (17 miles)
- Yate (17 miles)
- Chippenham (20 miles)
Also available in Stroud
- Double & Leaf-and-a-Half Fire Doors in Stroud
- Timber Fire Doorsets in Stroud
- Flat Entrance Fire Doors in Stroud
- Steel Fire Doors in Stroud
- Commercial & Office Fire Doors in Stroud
- Fire Door Supply & Fit in Stroud
- Fire Exit Doors in Stroud
- Security Fire Doors in Stroud
- FD90 & FD120 Doorsets across Gloucestershire
- All fire doors in Stroud