Certified FD90 and FD120 fire doors for Gloucester
Getting FD90 and FD120 fire doors right in Gloucester means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover Gloucester and the rest of Gloucestershire, with surveys arranged around your building's access and occupancy.
Fire door rules in Gloucester
In Gloucester, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Gloucestershire
Guide prices for FD90 and FD120 fire doors in Gloucester run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are used in Gloucester
Typical uses for FD90 and FD120 fire doors in Gloucester include generator rooms and separating walls with long ratings.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Gloucestershire
What does a Gloucester quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Gloucester?
We arrange surveys around your access needs and, where possible, combine Gloucester visits with other work in Gloucestershire. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Gloucester?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Cheltenham (7 miles)
- Stroud (8 miles)
- Tewkesbury (9 miles)
- Cirencester (16 miles)
- Great Malvern (17 miles)
- Evesham (20 miles)
Also available in Gloucester
- Flat Entrance Fire Doors in Gloucester
- School & Healthcare Fire Doors in Gloucester
- Fire Door Replacement in Gloucester
- FD30S Smoke Control Doorsets in Gloucester
- Acoustic Fire Doors in Gloucester
- Fire-Rated Screens & Fanlights in Gloucester
- Commercial & Office Fire Doors in Gloucester
- Glazed Fire Doors in Gloucester
- FD90 & FD120 Doorsets across Gloucestershire
- All fire doors in Gloucester