Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Redruth

We supply and fit FD90 and FD120 fire doors in Redruth (TR16) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,900 per single doorset in Redruth, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Redruth

Looking for FD90 and FD120 fire doors in Redruth? Our supply and fit service covers TR16 and the surrounding area, including Camborne and Truro. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

We cover TR16 and the surrounding area, including Camborne. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Regulations for FD90 and FD120 fire doors in Cornwall

Because Redruth is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

FD90 and FD120 fire doors prices in Redruth

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Redruth quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD90 and FD120 fire doors are needed

High fire-load stores and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Redruth as elsewhere.

Cornwall's stock is dominated by smaller towns, holiday lets, hotels and guest houses, plus care homes and converted period buildings.

  • High fire-load stores
  • Separating walls with long ratings
  • Generator rooms
  • Transformer and switch rooms

What's in the doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Questions about FD90 and FD120 fire doors in Redruth

Can you work around tenants or staff in Redruth?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Redruth quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Is the survey in Redruth free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Are FD120 doors always steel?

Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.

Neighbouring areas

Other fire doors in Redruth

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.