Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Redruth

We supply and fit FD60 fire doors in Redruth (TR16) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Redruth, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Redruth

Looking for FD60 fire doors in Redruth? Our supply and fit service covers TR16 and the surrounding area, including Camborne and Truro. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

We cover TR16 and the surrounding area, including Camborne. Tell us your postcode and preferred dates and we'll confirm a survey slot.

What the law says in Redruth

Fire doors in Redruth sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD60 fire doors in Cornwall

Our guide price for FD60 fire doors in Redruth is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are needed

Wherever they are in Redruth, FD60 fire doors are most often specified for compartment walls and higher-risk stores.

Cornwall's stock is dominated by smaller towns, holiday lets, hotels and guest houses, plus care homes and converted period buildings.

  • Compartment walls
  • Higher-risk stores
  • Plant and boiler rooms
  • Stair cores in taller blocks

What you get with each doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

FD60 fire doors in Redruth: questions

Will I get certificates for the doors fitted in Redruth?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

What does a Redruth quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Which rules do FD60 fire doors in Redruth need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Nearby towns we cover

Also available in Redruth

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.